Device Low Battery
If you are receiving notifications or error messages in the applications, you may need to replace the battery. In order to check, first make sure that your battery is seated properly in the sensor. If your battery is properly seated in the sensor, then you should replace it per the instructions that the sensor came with. As a reference, below is a guide for all of the sensor battery types you may need.
If the low battery message does not clear after the battery is replaced for greater than 24 hours, then you should delete and re-add the sensor.
Battery List
- Console: LS-180 (DC 3.6V 1800mAh, Nickel Metal Hydride, Rechargeable Battery)
- Grid Extender: LS-180 (DC 3.6V 1800mAh, Nickel Metal Hydride, Rechargeable Battery)
- Handset: LS80 (Old Ingrid # IG800) (DC 3.6V 800mAh, Nickel Metal Hydride, Rechargeable Battery)
- Base V1: LS-180 (DC 3.6V 1800mAh, Nickel Metal Hydride, Rechargeable Battery)
- Base V2: LS220 Li-ion 18650 3.7V 2200mAh
- Base S30: LS660 Li-ion 3.6V 6600mAh.
- CGW (Cellular Gateway): LS280 (Lithium ION rechargeable battery DC 3.7V 2800mAh)
- Repeater: LS220 Li-ion 18650 3.7V 2200mAh
- Entry Keypad: 2 AA Batteries
- Keychain Remote for V1/V2: CR2032 (3V)
- Keychain Remote for S30: CR2450 (3V)
- Siren Detector: CR2450N (The sensor can use Renata or Great)
- Fire Safety Sensor: CR123A (1300 mAh 3V)
- Smoke Detector: CR123A (3V)
- Motion Sensor (40 lbs.): CR123A (3V)
- Motion Sensor (80 lbs.): CR123A (3V)
- Standard Sensor: CR2450 (3V)
- Slim Sensor: CR2032 (Qty2) (3V)
- Micro Sensor: CR1632
- Environmental Sensor: CR123 (3V)
- Glass Break: CR123A (3V)
